View 2STD1360_4988024.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

2STD1360 2STF1360 - 2STN1360
Low voltage fast-switching NPN power transistors
Features

Very low collector-emitter saturation voltage High current gain characteristic Fast-switching speed
4
4
1
2
3
1
3 2
Applications

SOT-223
TAB
SOT-89
Emergency lighting LED Voltage regulation Relay drive
3 1
TO-252 (DPAK) Figure 1. Internal schematic diagram
Description
The devices are NPN transistors manufactured using new "PB-HDC" (power bipolar high density current) technology. The resulting transistor shows exceptional high gain performances coupled with very low saturation voltage. The complementary PNP types are the 2STD2360T4, the 2STF2360 and the 2STN2360.
Table 1.
Device summary
Marking D1360 1360 N1360 Packages DPAK SOT-89 SOT-223 Packaging Tape and reel Tape and reel Tape and reel
Order codes 2STD1360T4 2STF1360 2STN1360
October 2009
Doc ID 11783 Rev 2
1/11
www.st.com 11
Absolute maximum ratings
2STD1360, 2STF1360, 2STN1360
1
Absolute maximum ratings
Table 2. Absolute maximum ratings
Value Symbol Parameter 2STD1360 2STF1360 2STN1360 DPAK VCBO VCEO VEBO IC ICM IB IBM PTOT Tstg TJ Collector-base voltage (IE = 0) SOT-89 80 60 6 3 5 0.2 0.4 15 1.4 -65 to 150 150 1.6 SOT-223 V V V A A A A W C C Unit
Collector-emitter voltage (IB = 0) Emitter-base voltage Collector current Collector peak current (tP < 5 ms) Base current Base peak current (tP < 5 ms) Total dissipation at Tamb = 25 C Storage temperature Max. operating junction temperature (IC = 0)
Table 3.
Symbol RthJA(1)
Thermal data
Parameter Thermal resistance junction-ambient ___ _Max DPAK 8.3 SOT-89 89 SOT-223 78 Unit C/W
1. Device mounted on a PCB area of 1 cm2
2/11
Doc ID 11783 Rev 2
2STD1360, 2STF1360, 2STN1360
Electrical characteristics
2
Electrical characteristics
TCASE = 25C; unless otherwise specified. Table 4.
Symbol ICBO IEBO VBE(on) VCE(sat)(1) VBE(sat) (1) hFE(1)
Electrical characteristics
Parameter Collector cut-off current (IE = 0) Emitter cut-off current (IC = 0) Base-emitter on voltage Collector-emitter saturation voltage Base-emitter saturation voltage DC current gain Resistive load Delay time Rise time Storage time Fall time Transition frequency Test conditions VCB = 80 V VEB = 6 V VCE = 2 V IC = 2 A IC = 3 A _ IC = 2 A IC = 100 mA IB = 100 mA IB = 150 mA _ IB = 100 mA 80 160 630 650 130 180 0.9 Min. Typ. Max. 100 100 730 300 500 1.2 Unit nA nA mV mV mV V
IC = 100 mA_ VCE = 2 V IC = 1 A _ VCE = 2 V
400
td tr ts tf fT
VCC = 10 V IC = 3 A IB(on) = - IB(off) = 300 mA VBE(off) = - 5 V
17 81 620 54
20 100 720 65
ns ns ns ns MHz
IC = 0.1 A __ VCE = 10 V
130
1. Pulse test: pulse duration 300 s, duty cycle 2 %
2.1
Figure 2.
Typical characteristics (curves)
DC current gain (VCE = 5 V) Figure 3. DC current gain (VCE = 2 V)
Doc ID 11783 Rev 2
3/11
Electrical characteristics Figure 4. Collector emitter saturation voltage Figure 5.
2STD1360, 2STF1360, 2STN1360 Base emitter saturation voltage
Figure 6.
Resistive load switching on
Figure 7.
Resistive load switching off
Figure 8.
C1000 (pF)
Capacitance
CEB f = 1 MHz 100
CCB 10 0.1 1 10 VR100 (V)
4/11
Doc ID 11783 Rev 2
2STD1360, 2STF1360, 2STN1360
Electrical characteristics
2.2
Test circuits
Figure 9. Resistive load switching
1. Fast electronic switch 2. Non-inductive resistor
Doc ID 11783 Rev 2
5/11
Package mechanical data
2STD1360, 2STF1360, 2STN1360
3
Package mechanical data
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK(R) packages, depending on their level of environmental compliance. ECOPACK(R) specifications, grade definitions and product status are available at: www.st.com. ECOPACK(R) is an ST trademark.
6/11
Doc ID 11783 Rev 2
2STD1360, 2STF1360, 2STN1360
Package mechanical data
TO-252 (DPAK) mechanical data
DIM. A A1 A2 b b4 c c2 D D1 E E1 e e1 H L L1 L2 L4 R V2 0o 0.60 0.20 8o 4.40 9.35 1 2.80 0.80 1 6.40 4. 70 2.28 4.60 10.10 mm. min. 2.20 0.90 0.03 0.64 5.20 0.45 0.48 6.00 5.10 6.60 ty p ma x . 2.40 1.10 0.23 0.90 5.40 0.60 0.60 6.20
0068772_G
Doc ID 11783 Rev 2
7/11
Package mechanical data
2STD1360, 2STF1360, 2STN1360
SOT-89 mechanical data
mm Dim. Min. A B B1 C C1 D D1 E e e1 H K L R 1.40 0.44 0.36 0.35 0.35 4.40 1.62 2.29 1.42 2.92 3.94 1 0.89 0.25 Typ. Max. 1.60 0.56 0.48 0.44 0.44 4.60 1.83 2.60 1.57 3.07 4.25 8 1.20
7098166_C
8/11
Doc ID 11783 Rev 2
2STD1360, 2STF1360, 2STN1360
Package mechanical data
SOT-223 mechanical data
mm. DIM. min. A A1 B B1 c D e e1 E H V 3.30 6.70 0.02 0.60 2.90 0.24 6.30 0.70 3.00 0.26 6.50 2.30 4.60 3.50 7.00 3.70 7.30 10 o typ max. 1.80 0.1 0.85 3.15 0.35 6.70
0046067_L
Doc ID 11783 Rev 2
9/11
Revision history
2STD1360, 2STF1360, 2STN1360
4
Revision history
Table 5.
Date 21-Nov-2005 09-Oct-2009
Document revision history
Revision 1 2 Initial release Added 2STD1360T4 in TO-252 (DPAK) package Changes
10/11
Doc ID 11783 Rev 2
2STD1360, 2STF1360, 2STN1360
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
(c) 2009 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
Doc ID 11783 Rev 2
11/11

▲Up To Search▲

Price & Availability of 2STD1360

	To Download 2STD1360 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .